YR2024 - SCI 2

Impacts of characteristics of carbon black comprising microporous layer on performance and durability of gas diffusion layer under newly developed accelerated stress tests

Variation in performance and characteristics of long-term operated gas diffusion layer in a fuel cell electric vehicle

YR2023 - SCI 7

Development of a solid oxide fuel cell system integrated with a hybrid desiccant cooling system

Investigation of the operation characteristics and optimization of an alkaline water electrolysis system at high temperature and a high current density

Techno-economic evaluation of green hydrogen production with low-temperature water electrolysis technologies directly coupled with renewable power sources

Numerical analysis of a highly efficient cascade solid oxide fuel cell system with a fuel regenerator

Energetic, Exergetic, Economic, and Exergoeconomic Analysis of a Phosphoric Acid Fuel Cell-Organic Rankine Cycle Hybrid System 

Greenhouse gas reduction of steel industry by using green hydrogen produced from electrolysis with renewable electricity

Operational optimization of a hybrid desiccant cooling system for building air conditioning systemOperational optimization of a hybrid desiccant cooling system for building air conditioning system

YR2022 - SCI 4

Techno-economic analysis and Monte Carlo simulation of green hydrogen production technology through various water electrolysis technologies

Techno-economic analysis and Monte Carlo simulation for green hydrogen production using offshore wind power plant

Optimization of an ion transport membrane reactor system for syngas production

Novel approach to integrate CO2 utilization coupled with direct methane conversion to C2 products using solid oxide electrolysis cell

YR2021 - SCI 5

Investigating Influence of Geometry and Operating Conditions on Local Current, Concentration, and Crossover in Alkaline Water Electrolysis Using Computational Fluid Dynamics

Design and performance analysis of a cascade solid oxide fuel cell system for high electrical efficiency

Numerical modeling and analysis of the temperature effect on the performance of an alkaline water electrolysis system

Numerical modeling and analysis of the effect of pressure on the performance of an alkaline water electrolysis system

Performance analysis of a solid desiccant cooling system for a residential air conditioning system


YR2020 - SCI 1

Concept for Temperature-Cascade Hydrogen Release from Organic Liquid Carriers Coupled with SOFC Power Generation

YR2019 - SCI 4, KCI 1

Stochastic techno-economic analysis of power-to-gas technology for synthetic natural gas production based on renewable H2 cost and CO2 tax credit

HIGH-EFFICIENT reversible solid oxide fuel cell coupled with waste steam for distributed electrical energy storage system

Dynamic modeling and verification of a proton exchange membrane fuel cell-battery hybrid system to power servers in data centers

A spatially resolved physical model of an ion transport membrane reactor for system development

Analysis of performance and energy saving of a SOFC-based hybrid desiccant cooling system

YR2018 - SCI 1

Numerical analysis of an ion transport membrane system for oxy–fuel combustion

YR2017 - SCI 2

Dynamic modeling of solid oxide fuel cell and engine hybrid system for distributed power generation

Development of a highly efficient solid oxide fuel cell system

YR2016 - SCI 1

Dynamic simulation of a fuel cell hybrid vehicle during the federal test procedure-75 driving cycle

YR2015 - SCI 1

Quasi-three dimensional dynamic modeling of a proton exchange membrane fuel cell with consideration of two-phase water transport through a gas diffusion layer

YR2014 - SCI 3

Development of a coupled reactor with a catalytic combustor steam reformer for a 5 kW solid oxide fuel cell system

Optimization of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine hybrid system for distributed power generation

The scale up characteristics of a catalytic combustor with flow uniformity analysis

YR2013 - SCI 3, KCI 1

Operational characteristics of a planar steam reformer thermally coupled with a catalytic burner

Dynamic modeling and simulation of hydrogen supply capacity from a metal hydride tank

Development of a hybrid system of molten carbonate fuel cell and homogeneous charge compression ignition engine for distributed power generation

Numerical analysis of steam-methane reforming reaction for hydrogen generation using catalytic combustion

YR2012 - SCI 1, KCI 1

Dynamic modeling of a proton exchange membrane fuel cell system with shell-and-tube gas-to-gas membrane humidifier

A case study of different configurations for the performance analysis of solid oxide fuel cells with external reformers

YR2011 - SCI 1, KCI 2

A parametric study of the performance of a planar membrane humidifier with a heat and mass exchanger model for design optimization

Basic Analysis of heat and mass transfer characteristics of tubular membrane humidifier for proton exchange membrane fuel cell

Experimental study on the characteristics of heat exchanger of 1 kW PEMFC system for UAV

YR2010 - SCI 1

Two dimensional dynamic modeling of a shell-and-tube water-to-gas membrane humidifier for proton exchange membrane fuel cell

YR2009 - SCI 2

Dynamic simulation of a stationary proton exchange membrane fuel cell system

Configuration effects of air, fuel, and coolant inlets on the performance of proton exchange membrane fuel cell for automotive application

YR2007 - SCI 1

Quasi-three dimensional dynamic model of a proton exchange membrane fuel cell

YR2006 - KCI 1

Development status of fuel cell system BOP components